TELINC PRODUCTS (ALL)

 

Telinc Products
Model #	Description
DACS	TL5200 Digital Cross-connect Switch
TL5200AD	Digital Cross-connect Switch - Base Unit for single source AC/DC Power
	Base unit for 14 Port modules for 112 T1 (2688 DSOs) non-blocking switch.
	Includes equipment nest, one TL5203 Common Logic, one TL5204 Switchover module, Console cable (CH2SO002), and hood (CBMS0001).
	Requires either one TL5201 AC Power Supply or one TL5202 DC Power Supply. Can accommodate any mix of Power Supplies.
TL5200AC	Digital Cross-connect Switch - Base Unit for dual source AC Power
	Same as TL5200AD above except uses one or two TL5201 AC Power Supplies.
TL5200DC	Digital Cross-connect Switch - Base Unit for dual source DC Power
	Same as TL5200AD above except uses one or two TL5202 DC Power Supplies.
TL5206	Octal T-1 Port Module
	Eight T-1 Ports - may be programmed as certified long haul or short haul CSUs.
	Supports D4/ESF framing, B8ZS/AMI coding, ANSI T1.403 and ATT 54016.
TL5207	T-3 Port Module
	Single T-3 Port module. Dual BNC interfaces and supports 28 T-1s.
TL5208	Octal Synchronous V.35 Port Module
	Eight V.35 Synchronous Ports with V.54 loopbacks. Includes 2 CB3AO004.
TL5209	STS-1 Port Module
	Single STS-1 Port module. Dual BNC interfaces and supports 28 T-
TL5203	Common Logic Module
	Common Logic Module used for redundancy.
TL5201	AC Power Supply
	115/230 Volt AC Power Supply.
TL5202	DC Power Supply
	48 Volt DC Power Supply.
TL5204A	TELNET Management
	Telnet Module (TL5217) with Ethernet interface added to TL5204 Switchover Module.

 GO TO OUR HOMEPAGE - CLICK

| Products | Terminology | Search | Order | Wanted | email | Site-Map |

National Datamux Inc 2005. - All products, logo's and brand names mentioned are trademarks or registered trademarks of their respective owners.