Products
Embedded Device Servers
Device Servers
Embedded Software
Terminal Servers
Console Servers
Console Management Software
Server Management
Visualization
Print Servers
MPS & LPS
EPS2-100 & EPS4-100
Network Time Servers

Highlights
Specifications
Ordering

The EPS2-100 and EPS4-100 Print Servers provide a fast and convenient way to network multiple printers. The units provide multiple serial and parallel interfaces allowing four (EPS2-100) or six (EPS4-100) printers to be connected to a network. The RJ45 10/100 Ethernet interface provides the network connection and supports multiple protocols simultaneously for easy operations between platforms. The serial ports are designed so they can be used for serial printers, barcode scanners and many other serial devices.

Support for TCP/IP, IPX, AppleTalk, Novell, NDS, NDPS, and LAT protocols (LAT license required)
10/100 RJ45 network port
2 (EPS2-100) or 4 (EPS4-100) Centronics/Bitronics-compatible parallel ports
2 RJ45 serial ports with full modem controls
Easy installation and configuration
High-performance serial speeds of up to 230Kbps
Telnet and Reverse Telnet (rtel) support
Management via Telnet, SNMP, DHCP, HTTP and EZWebCon, Lantronix's management software
Flash ROM for easy software upgrades
Internal switching power supply (95-250VAC)

Protocols Supported Any combination of TCP/IP, IPX, AppleTalk, NetBIOS/NetBEUI, NDS, NDPS and LAT (LAT license required)
Network Interface Ethernet: 10/100 RJ45, 2DB25
Parallel Interface EPS2-100
2 DB25 (Centronics/Bitronics)

EPS4-100
4 DB25 (Centronics/Bitronics)

Serial Interface
2 RJ45 serial (RS-423/RS-232)
Data Rates Serial: 300bps to 230 Kbps
Parallel: 150 Kbps burst rate
System Software Flash ROM Standard: downloadable from TCP/IP host (TFTP download), DECnet host (MOP download) or NetWare file server
Management SNMP Compatible
DHCP
EZWebCon: Lantronix's management software
Telnet
HTTP
Diagnostic LEDs Power
Polarity
Link
OK
Network
Parallel
Serial
Compatibility Ethernet version 2.0/IEEE 802.3/IEEE 802.3u
Power Requirements (95-250VAC)
Environmental Operating temperature
5 to 50°C (41 to 122°F)

Storage temperature
-40 to 66°C (-40 to 151°F)
Physical Dimensions
(H x W x D)		 2.0 x 10.35 x 5.35. in
(5.0 x 26.0 x 13.7cm)

Weight
EPS2-100: 2.07 lbs (.95 kg)
EPS4-100: 2.73 lbs (1.24 kg)
Shipping Dimensions
(H x W x D)		 5.06 x 11.3 x 8.25 in
(12.86 x 28.7 x 21cm)

Weight:
EPS2-100: 3.51 lbs (1.6 kg)
EPS4-100: 4.6 lbs (2.10 kg)
Agency Approvals FCC A, C/UL, TUV, CE
Warranty 1-year limited warranty - as of August 1st, 2003

Part Number Description
EPS2-100 10/100 multiport print server, 2 DB25 parallel ports, Centronics/Bitronics compatible, 2 RJ45 (RS-232/RS-423) serial ports, 10/100 RJ45 network port, diagnostic LEDs, Installation Guide, CD-ROM with EZWebCon softwareand reference manual, internal switching power supply 90-250VAC
EPS4-100 10/100 multiport print server, 4 DB25 parallel ports, Centronics/Bitronics compatible, 2 RJ45 (RS-232/RS-423) serial ports, 10/100 RJ45 network port, diagnostic LEDs, Installation Guide, CD-ROM with EZWebCon software and reference manual, internal switching power supply 90-250VAC
LAT EPS200 LAT license for EPS2-100, required per unit basis, non-discountable
LAT EPS400 LAT license for EPS4-100, Required on per unit basis, Non-discountable
Datasheet (PDF)
Installation Guide (PDF)
Reference Manual (HTML)
Reference Manual (PDF)
Latest Firmware for EPS2-100
Latest Firmware for EPS4-100
Networking Tutorials
Glossary
 

 
 

Back to Home Page

                                      

                         

 

©National Data Mux 2002. - All products and brand names mentioned are trademarks or registered trademarks of their respective owners